Concrete Sealing Vancouver | Driveway Sealing Fraser Valley
10
page-template,page-template-full_width,page-template-full_width-php,page,page-id-10,ajax_fade,page_not_loaded,,qode-theme-ver-10.0,wpb-js-composer js-comp-ver-4.12,vc_responsive
 

Concrete Sealing

Concrete & Driveway Sealing In The Greater Vancouver Area

With concrete and driveway sealing from Showcase Landscaping, you can protect your stamped concrete, aggregate, brick, and asphalt surfaces.

 

At Showcase Landscaping we only use the most premium sealers. Through our experience, we have found that solvent-based acrylic sealers perform best in our climate as they leave a more uniform finish after absorbing into the concrete surface. Unlike water-based sealers, the acrylic sealers we use are non-yellowing and UV resistant allowing moisture from the concrete slab to escape, leaving behind no left over residue.

Importance of Concrete Sealing

It is recommended that concrete, brick and asphalt surfaces be sealed every two years. High traffic areas may be sealed every year to provide maximum surface protection.

 

When driveways, patios, pool decks and other concrete surfaces are left unsealed these surfaces can develop cracks, resulting in leaks and structural damage that can be costly to repair. Sealing your concrete will prevent surface discoloration and cracking.

Benefits Of Concrete Sealing

Seal coating from Showcase Landscaping:

  • Prevents oil, chemicals, stains, and contaminants from penetrating the surface
  • Impedes abrasion and surface wear
  • Makes cleaning easier

  • Intensifies and preserves the color of stamped concrete, aggregate, or brick surfaces
  • Prevents slippage when anti-slip additives are used
  • Offers a range of finishes, including low, medium or high gloss sheen

Our Process

Prior to applying a sealer it is crucial that the surface be pressure washed and clean of all debris. This is done using a commercial grade pressure washer. Depending on the age and type of surface, Showcase Landscaping will determine the most appropriate cleaning methods using specific wands and attachments capable of dispersing up to 5 GPM (Gallons Per Minute) or 4,000 PSI (Pounds Per Square Inch). In most cases, full GPM and PSI are not needed to clean most surfaces.

 

After waiting a full 24 hrs (weather depending) we begin preparing the surface for sealing. At this time, we remove any remaining surface debris with our high powered BR700 blowers. Upon completion, we are then ready to begin the sealing process.

 

After the sealing process is complete, areas are then taped off to prevent foot and vehicle traffic from entering the sealed area. It is suggested that 6 hrs pass prior to walking on the surface and a full 24 hrs for vehicle traffic.

Contact Showcase Landscaping For A Free Estimate On Concrete & Driveway Sealing

Keep your driveway and other outdoor surfaces in good repair and looking great with professional concrete and asphalt sealing from Showcase Landscaping. Contact us at 778.242.5887 for a free on-site evaluation and estimate.